T40 CHAMALEON


The hydraulic bending press T40 Chamaleon is provided with a lateral axis with the special ring rolling equipment for bending process.
Here are the main features of the bending press:
solid work table made in special spheroid cast iron, suitably shaped to withstand loads notably greater to all bending stresses;
cylinder placed under the work table, which is free fromframes for better use of the machine and tools, with frontal position for the operator;
carriage of forged steel with double slides, suitably hardened, grounded and protected by dust scrapers;
micrometer adjustment of the carriage stroke by hydraulic valve by hand wheels, positioned in front of the machine;
continuous strokes adjustment, even under the highest working pressure, so as to obtain the bending angle desired without practise tests and samples (thanks to this system the machine is ideal for either the production of prototypes or for the larger series);
hydraulic single block power unit with the possibility of adjusting the pressure;
approach feed speed adjustment through flow control valve;
die holder pins made in alloy steel with rapid conical change, hardened and grounded to obtain a strong lock (patent);
forced lubrication by hand pump (optional: automatic electric pump);
electric pedal control at low voltage (24 V) and push-button safety control timer;
roomy side tool holder shelves.

The main features of the bending station are:
stabilized steel structure and heat-treated steel shafts;
no. 2 knurled rollers;
speed reducer with lubricated helical gears;
movement of the rollers through a double foot pedal to change the direction of rotation of the rollers.

simasv t40 chamaleon
Workbench dimensions630x1100 mm
Height of workbench from the ground950 mm
Max operating pressure40 ton
Max. stroke of mobile punch250 mm
Mobile punch stroke adjustmentYES
Mobile punch advance and retrieval speed1750/1980 mm/'
Mobile punch operating speed470 mm/'
Speed selection deviceYES
Min. and max. axis base between mobile and fixed pins120/370 mm
Press bending capacity120x25 mm
Tool holding pins - Height120 mm
Tool holding pins - Diameter55 - 63 (opt.) mm
Mobile and fixed pins - Height120 mm
Mobile and fixed pins - Diameter55 - 63 (opt.) mm
Hydraulic power unit50 Lt
Slide lubricationManual
Maximum required power4/3 Hp/Kw
Side tool shelves2
Diameter of shafts on the bending machine30 mm
Diameter of rollers on the bending machine125-165 mm
Motor power of the bending machine0,75/1,1 KW
Revolutions per minute of the bending machine5/10 Rpm
Bending press dimensions - Width1200 mm
Bending press dimensions - Length1900 mm
Bending press dimensions - Height1365 mm
Weight1100 kg