The AV/PA version is predisposed for the mounting of a punching head for carrying out drilling, beading, nibbling, shutter slits, straight cuts and so on. There is also the option of activating the cutting or punching unit via the special reversing button.

The cutting capacity of variable angle notching machine is of 4 mm. thickness, and the cutting angle can be adjust from 30° to 140°.

Subject of a SIMASV® patent, the most important characteristic of the variable angle notching machine AV224PA is the automatic adjustment of the slack between the blades from 1 to 4 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses.

The machine is equipped with hydraulic blade blockage.

simasv av224pa m
Workbench dimensions950X800 mm
Blade length220 mm
Angle adjustment30-140°
Max. cutting thickness R42/mm²4 mm
Max. cutting thickness R60/mm²3 mm
Cycles per minute (for the total length of the blades)40
Max. punching capacity30x3,5 Ømm
Max. punching capacity (optional)40x2 Ømm
Max. punching depth350 mm
Goniometric squares with stop bar2
Set of blades for iron at 15°1
Set of blades for iron at 30°1
Pair of mechanical hold-downsoptional
Mechanical hold-down for squareoptional
Mechanical speed restrictoroptional
Notching machine dimensions - Width950 mm
Notching machine dimensions - Depth1000 mm
Notching machine dimensions - Height1260 mm
Weight880 kg

Variable angles