AF258P


The fixed angle notching machine AF258P is prearranged for the mounting of the punch head. The shearing head is mounted on rigid columns to prevent load oscillation of the head during the punching phase. However, during the notching phase the shearing head must be able to oscillate in the four directions to allow the auto-adjustment of the upper blades with respect to the lower ones. For this purpose two locking levers are set to the rear of the machine with the function of blocking or unblocking the head depending on whether the machine is punching or notching.

The auto-adjustment patented system between the upper and the lower blades allows simultaneous cutting of different thickness.

simasv af258p
Workbench dimensions700X900 mm
Blade length250 mm
Max. cutting thickness R42/mm²8 mm
Max. cutting thickness R60/mm²5 mm
Cycles per minute (for the total length of the blades)45
Max. punching capacity30x3,5 Ømm
Max. punching capacity (optional)60x2 Ømm
Max. punching depth260 mm
Slotting head cutting capacity (max. L 60x60x6)35 mm
Goniometric squares with stop bar2
Set of blades for iron at 90°1
Pair of mechanical hold-downs1
Mechanical speed restrictoroptional/reccomended
Notching machine dimensions - Width700 mm
Notching machine dimensions - Depth900 mm
Notching machine dimensions - Height1150 mm
Weight980 kg

Variable angles